- Supported under Arduino IDE v1.0.1+
- On-Board micro-USB connector for programming
- 9x 10-bit ADC pins
- 12x Digital I/Os (5 are PWM capable)
- Rx and Tx Hardware Serial Connections
- Our Smallest Arduino-Compatible Board Yet!
- 1.3″x0.7″
Arduino compatible Leonardo Pro Micro 5V This is a Arduino Compatible Pro Micro board, operating voltage 5V, supplied with unsoldered header pins. This is a very small but very capable board, which has a MicroUSB port on board to use for programming or for Serial input/output. No special USB drivers should be required for any operating system. It’s well documented online, with plenty of digital and analog input/outputs. It can also be configured to emulate a Keyboard or mouse device.
Specifications Size 34mm x 18mm x 7mm (with header pins installed) Processor 16 Mhz ATmega32U4 Input Voltage 5-9V Recommended. Can be powered via USB Digital Input/Outputs 14 digital I/O pins (2 used for TX/RX) 6 PWM capable (D3, D5, D6, D9, D10, D11) Analog Inputs 4 x 10-bit resolution input. Flash Memory 32Kb (4Kb used by bootloader) |